Home >> Canoeing & Kayaking Equipment >> Bixpy Motor Adaptors & Mounts
Universal Adaptors
Bixpy Transom Adaptor
The Bixpy Transom Adaptor Mount allows you to make your Bixpy Motor Kit into a transom mounted outboard motor allowing for easy steering.
- Fits Most Square Stern Canoes / Boats
- Fits Bixpy J-2 & K-1
- Works With Canoe Wooden Motor Mounts
- Quick Tilt Function For Landing & Launching
Bixpy Universal Flat Surface Mount
A simple, easy to use adaptor that allows mounting a Bixpy K-1 or J-2 motor to a flat surface. Easy to install by bolting the adaptor to almost any flat surface on a rigid canoe, kayak, sit on top or SUP (Fixings Not Included). This allows for forwards and backwards drive but being fixed requires a paddle or separate rudder to steer.
- Fits Almost Any Flat Surface
- Outer Dimensions: 127mm x 30mm
- 4 x 6mm Fixing Holes
- Fixings Not Included
Bixpy Universal Rudder Adaptor
The Universal Bixpy Rudder designed to accept the J-2 or K-1 motor. The lower section of the rudder blade has screwed mountings which allows attachment of the Bixpy J-2 Motor quickly. The universal rudder adaptor works off a 10mm stainless steel pin which fits not only Vibe Kayaks but will replace most other kayak manufacturers rudders as well.
- Fits Vibe Kayaks Gravity Rudder
- 10mm Stainless Steel Pin
- 90 Degree Hinge To Allow Deployment & Up Haul
- 18in. x 4in. Rudder Blade
- Pin Length - 85 mm. Gap From Pin To Blade - 38 mm
- Top Of Pin To Top Of Motor 12.25" (30.5cm)
- For Effective Use The Bixpy Motor Needs To Be 2"-3" Under Waterline
Bixpy Versa Rudder With V-Arm Steering
The Versa rudder is the most recent rudder system designed for use with the K-1 Motor Only. Featuring a tough anodized aluminium rudder blade along with quick release V-Arm Steering. Mounting using the 10mm stainless rudder pin means this rudder is compatible with most common kayak brand systems.
- Fits Some Vibe, Feelfree, Perception & Enigma Kayaks
- 10mm Stainless Steel Pin
- 90 Degree Quick Slide & Stow Feature Up Haul
- Lock Down Mech For Using Reverse Speeds
- Quick Release V-Arm Steering
- Extended Rudder Tail To Improve Steering
- Tough Anodized Aluminium Blade Construction
Thru-Hull & Hobie Kayak Adaptors
Bixpy DIY ThruHull Adaptor
A DIY adaptor that allows you to mount the Bixpy J-2 Motor to a flat surface like the Feelfree Sonar Pod, 3 Waters BigFish Pod or Wilderness Systems FlexPod. A brilliant adaptor if you want to use your existing pod and mount the J-2 Motor to almost any flat surface.
- Fits Feelfree Sonar Pod
- Fits 3 Waters BigFish Pod
- Fits Wilderness Systems FlexPod
- All Hardwear Included (Pods Not Included)
- Motor shield To Protect The Motor
- Motor Draft: 25cm (10") from mounting surface to bottom of motor
Bixpy Twist & Stow Rudder Adaptor
This Bixpy adaptor allows you to fit a J-2 or K-1 motor to the Twist and Stow Rudder system found on most Hobie Kayak Models including the Hobie Sport, Rev 11, Rev 13, Rev 16, Outback Pre 2019, Outfitter and Oasis. Simply swap your blade for this adaptor reusing the exisiting hardwear, this also allows you to steer using the factory steering.
- Compatible With Hobie Kayaks Using Hobie® Twist & Stow Rudders
- Hardwear Not Included - Reuse Exisiting Hardwear
Bixpy Power Pole Adaptor
An easy to fit mounting to allow a K-1 or J-2 Bixpy to fit to a Hobie Outback 2019+ or Pro Angler 2025+ using the power pole mounting brass insert mounting points on the back. This adaptor can also fit Older Pro Anglers and Compass Models with an additional mounting plate (not included) please Contact Us for more info.
- Quick Release For Quick Set Up
- Hinged To Allow The Motor To Lift Out Of The Water
- Power Pole Compatible Fixings Included
- 8" to 13" from bottom of plate to bottom of motor - it is recommended that the bottom of your motor be about 3" to 5" below the waterline and more in choppy water as necessary
- Motor shield To Protect The Motor
- Fits: Outback 2019+ & Pro Angler 2025+
Bixpy Thru-Hull Feelfree Pod Adaptor
A simple way of mounting a Bixpy K-1 Motor to a Feelfree Kayak that uses a Sonar Pod. This adaptor simply uses the exisiting Sonar Pod Slot and can still be lifted in and out of the slot for easier landing and launching. If you are unsure if this will fit your Feelfree kayak please Contact Us for more info.
- Fits: Lure 10V2, Lure 11.5 V1 or V2, Lure 13.5 V1 or V2 and Moken 12.5 V2.
- Built In Protective Bumper For Light Underwater Impacts
- Easy Installation
- Please Note: Installation Will Not Leave Enough Space For A Transducer To Be Mounted As Intended.
SUP & Inflatable Canoe or Kayak Adaptors
Bixpy DIY Fin Adaptor Patch
This DIY fin adaptor patch is the mounting plate patch required for the bottom of an inflatable kayak. Designed to be used with the Bixpy Slide & Lock Fin Mount (Sold Separately) this DIY fin adaptor patch can be glued to the bottom of your inflatable allowing inflatable paddler to enjoy a Bixpy J-2 Motor.
- Fits Most Inflatable Kayaks
- Does Not Include Bixpy Slide & Lock Fin (Sold Below)
- Adhesive Not Included
Bixpy Slide & Lock Fin Adaptor
This Slide & Lock Fin motor mount is an easy way to attach the Bixpy J-2 motor to almost any inflatable kayak or SUP. Designed for use with the Bixpy Slide & Lock Fin Patch (above) which is similar to the fin block found on most SUPs.
- Fits Most Inflatable Kayaks
- Does Not Include Bixpy Slide & Lock Fin Patch (Sold Above)
- Similar To Many SUP Fin Mountings
Bixpy U.S Fin Adaptor
This Bixpy Motor Mount has been designed for use with U.S Fin mountings only. It is an easy way to attach the Bixpy K-1 or J-2 motor to almost any inflatable kayak, canoe or SUP using the built in U.S Fin Box.
- Fits Almost Anything Using a U.S Fin Box
- If You Are Unsure On The Compatibility Please Contact Us
Bixpy Flip & Lock Fin Adaptor
This Bixpy Motor Mount has been designed for use with Flip & Lock Fin boxes only. This is one of the easiest ways to mount either a Bixpy K-1 or J-2 motor to some inflatable kayaks, canoes or SUPs that use a Flip & Lock Fin Box.
- Fits Almost Anything Using a Flip & Lock Fin Box
- If You Are Unsure On The Compatibility Please Contact Us
If you can't find what you are looking for or you're unsure which to choose, give us a call:
Tel: 01603 747139 or Email: Sales@norfolk-canoes.co.uk